AGiSS JPdaGrade Download
To use JavaGrade, you must first install the free Waba VM on your PDA.
For most PDAs try the http://www.wabasoft.com/download.shtml link.
There are other Waba VMs for PDAs such as the Compaq iPaq from http://www.wabasoft.com/vms.shtml.
Note If the link to the IPaq WabaVM is not available you can download the IPaq WabaVM Zip from here.
After you have the Waba VM installed on your PDA and it is functioning properly, you can then install the JPdaGrade files on your PDA and begin using it.
Download the self-extracting jpdagradev1_0b4.exe 87 KB (87,935 bytes) from the AGiSS web site.
Run the executable to extract the files to your hard disk.
Then follow the installation instructions below depending on the PDA you are using:
Installation for Windows CE (Handhelds and Pocket PC) Devices
To install JPdaGrade on your WinCE device follow the steps below:
1) Copy all of the files extracted under the \WindowsCEDevice directory to the appropriate root directory on your Windows CE device.
2) Click on the Start Menu button and you should see a link to JPdaGrade in the menu, select the JPdaGrade link.
3) Verify that the program works.
Using Class Files: All class files (*.wgc) that JPdaGrade uses are located under the \Program Files\JPdaGrade\Files directory. To add or remove files to
JPdaGrade simply copy your *.wgc files from another computer to this location on your Palm device. The next time you open JPdaGrade it will
list the files in the drop down list.
JPdaGrade Screen Shots
Screen Shot 1
Screen Shot 2
If you have any questions, problems, or even suggestions please don't hesitate to Contact AGiSS.
Home | Products | Order | Download Center
Last revised: June 13, 2005
© 2005 AGiSS All
Rights Reserved
WinGrade is a registered trademark of AGiSS
| 
